New Alto Red Eagle 3-4 PowerPack.
DURABILITY AND PERFORMANCE BENEFITS
This kit will correct, prevent and reduce the complaints of: 2-3 long slide with tail bump, 2-3 slide-bang at 3/4 throttle, slide-bump reverse engagements, 2-3 slip and/or slide in performance vehicles as well as premature clutch burn up related to under capacity for vehicle application.
The contents of this PowerPack® will allow you to increase the friction plate capacity to address the above listed complaints. The additional capacity not only increases clutch pack performance and
durability but also offers more resiliency in addition to a significant increase in torque holding ability.
This is a kit with Red Eagle Hi Performance one sided friction technology clutches for the 3-4 clutch pack.
These plates are Red Eagle high performance clutch plates.
These clutches are put through a process where the friction paper is saturated in a phenolic resin, cured, and then saturated a second time in a silicate. The silicate imparts high heat resistance.
THIS KIT ALLOWS YOU TO INSTALL ALTO SINGLE SIDED RED-EAGLE FRICTION CLUTCH TECHNOLOGY INTO YOUR 3-4 CLUTCH PACK.
Red Eagle Clutches: Are designed with a softer, more resilient base paper Assure less wear against opposing steel plates Reduce the inciedence of steel plates
Technical Advise: Always pre-soak all friction elements in recommended ATF for at least 30 minutes before installation.
026757HP Kit Contents:
(8) 026742A (.062” / 1.57mm) Red Eagle® Friction Plates
(8) 026701AK (.059” / 1.50mm) Kolene® Steel Plates
(1) 026717AK (.090” / 2.29mm) Kolene® Steel Plates
(1) 026713 (.125” / 3.18mm) Top Pressure Plate
(1) 026251-094 (.094” / 2.39mm) Heavy Duty Top Snap Ring